TY - JOUR
T1 - A 3D thermomechanical constitutive model for polycarbonate and its application in ballistic simulation
AU - Wang, Jun
AU - Xu, Yingjie
AU - Gao, Tenglong
AU - Zhang, Weihong
AU - Moumni, Ziad
N1 - Publisher Copyright:
© 2018 Society of Plastics Engineers
PY - 2018/12/1
Y1 - 2018/12/1
N2 - This paper presents a 3D thermomechanical constitutive model for polycarbonate (PC) polymers, aiming to predict the material characteristics of PC under complex thermomechanical boundary and strong impact loading conditions. The model is applied to simulate the high-velocity ballistic impact tests. Quasi-static tension, Split-Hopkinson Tension Bar (SHTB), and ballistic impact tests are carried out to experimentally investigate the thermomechanical behavior of PC. Fundamental characteristics of PC, such as the transient yield peak, the post-yield softening and the subsequent hardening, are characterized by introducing two scalar and one tensorial internal variables. Constitutive equations, specifically, (i) the plastic flow rule; (ii) the evolution equations associated with the internal variables; (iii) the temperature evolution; (iv) the strain rate, temperature and pressure-dependent yield limit are derived within a thermodynamically consistent framework. The model is then implemented into the finite element software ABAQUS/Explicit by means of a user-defined material subroutine VUMAT. Finally, numerical simulations are carried out and validated against experimental data. Finite element simulations of the ballistic tests well demonstrate the capabilities of the proposed model to accurately predict thermomechanical behavior of PC undergoing high-velocity impact loadings. POLYM. ENG. SCI., 58:2237–2248, 2018.
AB - This paper presents a 3D thermomechanical constitutive model for polycarbonate (PC) polymers, aiming to predict the material characteristics of PC under complex thermomechanical boundary and strong impact loading conditions. The model is applied to simulate the high-velocity ballistic impact tests. Quasi-static tension, Split-Hopkinson Tension Bar (SHTB), and ballistic impact tests are carried out to experimentally investigate the thermomechanical behavior of PC. Fundamental characteristics of PC, such as the transient yield peak, the post-yield softening and the subsequent hardening, are characterized by introducing two scalar and one tensorial internal variables. Constitutive equations, specifically, (i) the plastic flow rule; (ii) the evolution equations associated with the internal variables; (iii) the temperature evolution; (iv) the strain rate, temperature and pressure-dependent yield limit are derived within a thermodynamically consistent framework. The model is then implemented into the finite element software ABAQUS/Explicit by means of a user-defined material subroutine VUMAT. Finally, numerical simulations are carried out and validated against experimental data. Finite element simulations of the ballistic tests well demonstrate the capabilities of the proposed model to accurately predict thermomechanical behavior of PC undergoing high-velocity impact loadings. POLYM. ENG. SCI., 58:2237–2248, 2018.
U2 - 10.1002/pen.24842
DO - 10.1002/pen.24842
M3 - Article
AN - SCOPUS:85042538261
SN - 0032-3888
VL - 58
SP - 2237
EP - 2248
JO - Polymer Engineering and Science
JF - Polymer Engineering and Science
IS - 12
ER -