TY - GEN
T1 - A Wideband Mixed-Signal Predistorter for Small-Cell Base Station Power Amplifiers
AU - Manyam, Venkata Narasimha
AU - Pham, Dang Kien Germain
AU - Jabbour, Chadi
AU - Desgreys, Patricia
N1 - Publisher Copyright:
© 2018 IEEE.
PY - 2018/4/26
Y1 - 2018/4/26
N2 - A novel low-power wideband mixed-signal approach to linearize RF power amplifiers (PAs) is presented. The proposed mixed-signal predistorter (MSPD) is based on FIR memory polynomial (FIR-MP) model, where digital FIR filter improves the memory correction performance without any bandwidth expansion and the MP predistorter in analog baseband provides superior linearization. MSPD avoids 5X bandwidth requirement for the transmitter and the power-hungry RF components when compared to digital predistorters (DPDs) and analog-RF predistorters (ARFPDs), respectively. This makes the MSPD solution a very low-power candidate and especially attractive in the context of small-cell base stations. Extracted PA model of a commercial 1 W GaAs HBT PA is linearized over an 80 MHz signal; results prove that the FIR-MP based MSPD in ideal system-level simulations provides an improvement of 14.3 dB and 13.5 dB, in adjacent and alternate channel leakage ratio, ACLR1 and ACLR2, respectively, in comparison with FIR envelope memory polynomial (FIR-EMP) model, used in ARFPD. The impact of various non-idealities are simulated at electrical-level to derive the requirements for the integrated circuit implementation shows that a resolution of 8 bits for the coefficients and a signal path SNR of 60 dB is required to achieve ACLR1 above 45 dBc, with as little as 9 coefficients in the analog domain.
AB - A novel low-power wideband mixed-signal approach to linearize RF power amplifiers (PAs) is presented. The proposed mixed-signal predistorter (MSPD) is based on FIR memory polynomial (FIR-MP) model, where digital FIR filter improves the memory correction performance without any bandwidth expansion and the MP predistorter in analog baseband provides superior linearization. MSPD avoids 5X bandwidth requirement for the transmitter and the power-hungry RF components when compared to digital predistorters (DPDs) and analog-RF predistorters (ARFPDs), respectively. This makes the MSPD solution a very low-power candidate and especially attractive in the context of small-cell base stations. Extracted PA model of a commercial 1 W GaAs HBT PA is linearized over an 80 MHz signal; results prove that the FIR-MP based MSPD in ideal system-level simulations provides an improvement of 14.3 dB and 13.5 dB, in adjacent and alternate channel leakage ratio, ACLR1 and ACLR2, respectively, in comparison with FIR envelope memory polynomial (FIR-EMP) model, used in ARFPD. The impact of various non-idealities are simulated at electrical-level to derive the requirements for the integrated circuit implementation shows that a resolution of 8 bits for the coefficients and a signal path SNR of 60 dB is required to achieve ACLR1 above 45 dBc, with as little as 9 coefficients in the analog domain.
U2 - 10.1109/ISCAS.2018.8351620
DO - 10.1109/ISCAS.2018.8351620
M3 - Conference contribution
AN - SCOPUS:85056031831
T3 - Proceedings - IEEE International Symposium on Circuits and Systems
BT - 2018 IEEE International Symposium on Circuits and Systems, ISCAS 2018 - Proceedings
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2018 IEEE International Symposium on Circuits and Systems, ISCAS 2018
Y2 - 27 May 2018 through 30 May 2018
ER -