Mechanical earth modeling and fault reactivation analysis for CO ₂ -enhanced oil recovery in Gachsaran oil field, south-west of Iran

There is a huge potential for CO ₂ -EOR and CO ₂ storage in depleted carbonate reservoirs in the south-west of Iran. In the first step of a CO ₂ -EOR operation, a geomechanical assessment is needed to find out geological conditions, mechanical and strength properties of formation rocks (e.g., reservoir rock and caprock), in situ stress magnitudes and orientation and in situ pore pressure profile. An integrated analysis is performed in this work for geomechanical assessment of a reservoir–caprock system in Gachsaran oil field, south-west of Iran. A one-dimensional mechanical earth model (MEM) is built for 47 wells in the studied field based on drilling and logging data, laboratory and in situ tests. Static elastic and strength parameters of various formation rocks (limestone, dolomite, anhydrite, gray marl and salt) are evaluated from laboratory experiments. Empirical correlations are obtained to convert dynamic rock properties and well-log data to static elastic properties and strength parameters. The initial in situ pore pressure is calculated using modified Eaton method. In situ stresses state is evaluated based on the poroelastic method and calibrated using LOT and XLOT tests. The orientation of in situ stresses is obtained based on image logs. Fractures and faults analysis is performed to determine their orientations. An analytical analysis is performed to estimate the maximum sustainable CO ₂ injection pressure to prevent fault reactivation. This study presents a comprehensive method to reservoir and caprock characterization using laboratory and well-log data and 1D mechanical earth model. It helps the analysis of the geomechanical problems during CO ₂ -EOR and provides the necessary information to build 3D geomechanical model for numerical simulations.