Non-linear modeling of RF thermistor, application to bolometer mount calibration

A. Kazemipour; F. Ziade; D. Allal; E. Bergeault; A. Litwin

doi:10.1109/CPEM.2010.5544177

Non-linear modeling of RF thermistor, application to bolometer mount calibration

A. Kazemipour
, F. Ziade
, D. Allal
, E. Bergeault
, A. Litwin

Laboratoire National de Métrologie et d'Essais

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

RF bolometer thermistor is studied for a wide frequency range. A novel equivalent electrical model is presented to show the non-linear behavior of the bolometer thermistor for different polarization DC-currents. This model has been used as "detector section" of a bolometer RF-power sensor and the its "efficiency η" evaluated by the simple and quick "3-γ i.e. Impedance Method".

Original language	English
Title of host publication	2010 Conference on Precision Electromagnetic Measurements, CPEM 2010
Pages	698-699
Number of pages	2
DOIs	https://doi.org/10.1109/CPEM.2010.5544177
Publication status	Published - 21 Sept 2010
Event	2010 Conference on Precision Electromagnetic Measurements, CPEM 2010 - Daejeon, Korea, Republic of Duration: 13 Jun 2010 → 18 Jun 2010

Publication series

Name	CPEM Digest (Conference on Precision Electromagnetic Measurements)
ISSN (Print)	0589-1485

Conference

Conference	2010 Conference on Precision Electromagnetic Measurements, CPEM 2010
Country/Territory	Korea, Republic of
City	Daejeon
Period	13/06/10 → 18/06/10

Access to Document

10.1109/CPEM.2010.5544177

Cite this

Kazemipour, A., Ziade, F., Allal, D., Bergeault, E., & Litwin, A. (2010). Non-linear modeling of RF thermistor, application to bolometer mount calibration. In 2010 Conference on Precision Electromagnetic Measurements, CPEM 2010 (pp. 698-699). Article 5544177 (CPEM Digest (Conference on Precision Electromagnetic Measurements)). https://doi.org/10.1109/CPEM.2010.5544177

@inproceedings{4ad80eafcdfa4b79ae6cb9a37d6aab23,

title = "Non-linear modeling of RF thermistor, application to bolometer mount calibration",

abstract = "RF bolometer thermistor is studied for a wide frequency range. A novel equivalent electrical model is presented to show the non-linear behavior of the bolometer thermistor for different polarization DC-currents. This model has been used as {"}detector section{"} of a bolometer RF-power sensor and the its {"}efficiency η{"} evaluated by the simple and quick {"}3-γ i.e. Impedance Method{"}.",

author = "A. Kazemipour and F. Ziade and D. Allal and E. Bergeault and A. Litwin",

year = "2010",

month = sep,

day = "21",

doi = "10.1109/CPEM.2010.5544177",

language = "English",

isbn = "9781424467952",

series = "CPEM Digest (Conference on Precision Electromagnetic Measurements)",

pages = "698--699",

booktitle = "2010 Conference on Precision Electromagnetic Measurements, CPEM 2010",

note = "2010 Conference on Precision Electromagnetic Measurements, CPEM 2010 ; Conference date: 13-06-2010 Through 18-06-2010",

}

Kazemipour, A, Ziade, F, Allal, D, Bergeault, E & Litwin, A 2010, Non-linear modeling of RF thermistor, application to bolometer mount calibration. in 2010 Conference on Precision Electromagnetic Measurements, CPEM 2010., 5544177, CPEM Digest (Conference on Precision Electromagnetic Measurements), pp. 698-699, 2010 Conference on Precision Electromagnetic Measurements, CPEM 2010, Daejeon, Korea, Republic of, 13/06/10. https://doi.org/10.1109/CPEM.2010.5544177

Non-linear modeling of RF thermistor, application to bolometer mount calibration. / Kazemipour, A.; Ziade, F.; Allal, D. et al.
2010 Conference on Precision Electromagnetic Measurements, CPEM 2010. 2010. p. 698-699 5544177 (CPEM Digest (Conference on Precision Electromagnetic Measurements)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Non-linear modeling of RF thermistor, application to bolometer mount calibration

AU - Kazemipour, A.

AU - Ziade, F.

AU - Allal, D.

AU - Bergeault, E.

AU - Litwin, A.

PY - 2010/9/21

Y1 - 2010/9/21

N2 - RF bolometer thermistor is studied for a wide frequency range. A novel equivalent electrical model is presented to show the non-linear behavior of the bolometer thermistor for different polarization DC-currents. This model has been used as "detector section" of a bolometer RF-power sensor and the its "efficiency η" evaluated by the simple and quick "3-γ i.e. Impedance Method".

AB - RF bolometer thermistor is studied for a wide frequency range. A novel equivalent electrical model is presented to show the non-linear behavior of the bolometer thermistor for different polarization DC-currents. This model has been used as "detector section" of a bolometer RF-power sensor and the its "efficiency η" evaluated by the simple and quick "3-γ i.e. Impedance Method".

UR - https://www.scopus.com/pages/publications/77956630495

U2 - 10.1109/CPEM.2010.5544177

DO - 10.1109/CPEM.2010.5544177

M3 - Conference contribution

AN - SCOPUS:77956630495

SN - 9781424467952

T3 - CPEM Digest (Conference on Precision Electromagnetic Measurements)

SP - 698

EP - 699

BT - 2010 Conference on Precision Electromagnetic Measurements, CPEM 2010

T2 - 2010 Conference on Precision Electromagnetic Measurements, CPEM 2010

Y2 - 13 June 2010 through 18 June 2010

ER -

Non-linear modeling of RF thermistor, application to bolometer mount calibration

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this