Skip to main navigation Skip to search Skip to main content

Repealite: Implementation of an indoor positioning receiver with pseudolite/repeater approach

Research output: Contribution to conference › Paper › peer-review

4 Citations (Scopus)

Abstract

The present paper will describe a new approach for indoor positioning, combining characteristics of two systems: pseudolites and repeaters. Previous publications have already described the main advantages of both systems [l]-[2]. Our goal is to propose a solution combining the best of each method: for pseudolite, the possibility to cope with carrier phase measurements in order to improve the accuracy and to reduce the effect of multipath, and for repeater the simplicity of the infrastructure, the automatic synchronisation with the satellite constellation and the absence of the so-called "near-far" effect. When dealing with indoor positioning, it is possible to follow two approaches: with or without infrastructure. The latter case is illustrated by the so-called High ensitivity GNSS (HS-GNSS): the idea is to decrease the detection level of the satellite signal down to -150 or -160 dBm (as compared to the typical-130 dBm of outdoor received power level). Although this approach yielded real improvements, it does not appear to be the final answer to indoor positioning. GSM techniques, on the other hand, can also be considered as "no added infrastructure" since the mobile network is already deployed (for telecommunication purposes): unfortunately, they do not provide accuracy to the required level for many applications. WLAN could also be considered as a "no added infrastructure" solution but it appears that the telecommunication deployment is not enough for positioning to a sufficient accuracy. Thus, one should take into consideration the need for a local infrastructure for accurate indoor positioning. The main point is then to find the "lightest" possible infrastructure: either the least expensive or the easiest to deploy. The coverage and the complexity of the system are then of great importance. Pseudolites and repeaters, GNSS based techniques, are potentially good candidates when considering these aspects. In the paper we are addressing theoretical aspects of a new system that merges both approaches. In addition to the respective advantages already described above, it is possible to add that the repeater approach can work with signal from only one satellite (or from a generator of only one signal). It is thus possible to design a system using signal generated from a single pseudolite carrying out phase measurements through four repeaters. The system will be described, as well as simulation results showing the expected performance levels.

Original languageEnglish
Publication statusPublished - 20 Mar 2008
EventEuropean Navigation Conference, ENC-GNSS 2008 - Toulouse, France
Duration: 23 Apr 2008 → 25 Apr 2008

Conference

ConferenceEuropean Navigation Conference, ENC-GNSS 2008
Country/TerritoryFrance
CityToulouse
Period23/04/08 → 25/04/08

Fingerprint

Dive into the research topics of 'Repealite: Implementation of an indoor positioning receiver with pseudolite/repeater approach'. Together they form a unique fingerprint.

Cite this