The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam

P. Musella; R. Alemany; N. Almeida; J. Bourotte; F. Beaudette; W. Bialas; M. Cerutti; A. David; D. Evans; Y. Geerebaert; P. Gras; M. Husejko; T. Kolberg; P. Paganini; J. C. Da Silva; P. Rumerio; P. Silva; C. Thiebaux; J. Varela; E. Vlassov

doi:10.1109/RTC.2007.4382836

The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam

P. Musella
, R. Alemany
, N. Almeida
, J. Bourotte
, F. Beaudette
, W. Bialas
, M. Cerutti
, A. David
, D. Evans
, Y. Geerebaert
, P. Gras
, M. Husejko
, T. Kolberg
, P. Paganini
, J. C. Da Silva
, P. Rumerio
, P. Silva
, C. Thiebaux
, J. Varela
, E. Vlassov

LIP - Lisboa
European Organization for Nuclear Research
Ip Paris
University of Bristol
Institut Pierre Simon Laplace, CNRS and CEA
University of Notre Dame
Institute for Theoretical and Experimental Physics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

The Electromagnetic Calorimeter of the CMS experiment at CERN is an homogeneous calorimeter made of about 80000 Lead Tungstate crystals, that will start to operate at the LHC at the end of 2007. From June to November 2006, ten barrel Supermodules (1700 crystals each) were exposed to beam at CERN SPS, both in standalone and in association with portions of the Hadron Calorimeter. We present the description of the system used to configure and readout the calorimeter during the campaign. The full set of final readout electronics boards was employed, together with the pre-series version of the data acquisition software. During the campaign, the hardware and software concepts for the final system were validated. The system allowed the inter-calibration of the ten Supermodules and allowed to perform several important studies of the detector performances, such as energy resolution, response linearity and radiation-hardness.

Original language	English
Title of host publication	2007 15th IEEE-NPSS Real-Time Conference, RT
DOIs	https://doi.org/10.1109/RTC.2007.4382836
Publication status	Published - 1 Dec 2007
Event	2007 15th IEEE-NPSS Real-Time Conference, RT - Batavia, IL, United States Duration: 29 Apr 2007 → 4 May 2007

Publication series

Name	2007 15th IEEE-NPSS Real-Time Conference, RT

Conference

Conference	2007 15th IEEE-NPSS Real-Time Conference, RT
Country/Territory	United States
City	Batavia, IL
Period	29/04/07 → 4/05/07

Access to Document

10.1109/RTC.2007.4382836

Cite this

Musella, P., Alemany, R., Almeida, N., Bourotte, J., Beaudette, F., Bialas, W., Cerutti, M., David, A., Evans, D., Geerebaert, Y., Gras, P., Husejko, M., Kolberg, T., Paganini, P., Da Silva, J. C., Rumerio, P., Silva, P., Thiebaux, C., Varela, J., & Vlassov, E. (2007). The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam. In 2007 15th IEEE-NPSS Real-Time Conference, RT Article 4382836 (2007 15th IEEE-NPSS Real-Time Conference, RT). https://doi.org/10.1109/RTC.2007.4382836

@inproceedings{809441e9da6d4da3b1e4d06ba7daa9a4,

title = "The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam",

abstract = "The Electromagnetic Calorimeter of the CMS experiment at CERN is an homogeneous calorimeter made of about 80000 Lead Tungstate crystals, that will start to operate at the LHC at the end of 2007. From June to November 2006, ten barrel Supermodules (1700 crystals each) were exposed to beam at CERN SPS, both in standalone and in association with portions of the Hadron Calorimeter. We present the description of the system used to configure and readout the calorimeter during the campaign. The full set of final readout electronics boards was employed, together with the pre-series version of the data acquisition software. During the campaign, the hardware and software concepts for the final system were validated. The system allowed the inter-calibration of the ten Supermodules and allowed to perform several important studies of the detector performances, such as energy resolution, response linearity and radiation-hardness.",

author = "P. Musella and R. Alemany and N. Almeida and J. Bourotte and F. Beaudette and W. Bialas and M. Cerutti and A. David and D. Evans and Y. Geerebaert and P. Gras and M. Husejko and T. Kolberg and P. Paganini and \{Da Silva\}, \{J. C.\} and P. Rumerio and P. Silva and C. Thiebaux and J. Varela and E. Vlassov",

year = "2007",

month = dec,

day = "1",

doi = "10.1109/RTC.2007.4382836",

language = "English",

isbn = "1424408679",

series = "2007 15th IEEE-NPSS Real-Time Conference, RT",

booktitle = "2007 15th IEEE-NPSS Real-Time Conference, RT",

note = "2007 15th IEEE-NPSS Real-Time Conference, RT ; Conference date: 29-04-2007 Through 04-05-2007",

}

Musella, P, Alemany, R, Almeida, N, Bourotte, J, Beaudette, F, Bialas, W, Cerutti, M, David, A, Evans, D, Geerebaert, Y, Gras, P, Husejko, M, Kolberg, T, Paganini, P, Da Silva, JC, Rumerio, P, Silva, P, Thiebaux, C, Varela, J & Vlassov, E 2007, The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam. in 2007 15th IEEE-NPSS Real-Time Conference, RT., 4382836, 2007 15th IEEE-NPSS Real-Time Conference, RT, 2007 15th IEEE-NPSS Real-Time Conference, RT, Batavia, IL, United States, 29/04/07. https://doi.org/10.1109/RTC.2007.4382836

TY - GEN

T1 - The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam

AU - Musella, P.

AU - Alemany, R.

AU - Almeida, N.

AU - Bourotte, J.

AU - Beaudette, F.

AU - Bialas, W.

AU - Cerutti, M.

AU - David, A.

AU - Evans, D.

AU - Geerebaert, Y.

AU - Gras, P.

AU - Husejko, M.

AU - Kolberg, T.

AU - Paganini, P.

AU - Da Silva, J. C.

AU - Rumerio, P.

AU - Silva, P.

AU - Thiebaux, C.

AU - Varela, J.

AU - Vlassov, E.

PY - 2007/12/1

Y1 - 2007/12/1

N2 - The Electromagnetic Calorimeter of the CMS experiment at CERN is an homogeneous calorimeter made of about 80000 Lead Tungstate crystals, that will start to operate at the LHC at the end of 2007. From June to November 2006, ten barrel Supermodules (1700 crystals each) were exposed to beam at CERN SPS, both in standalone and in association with portions of the Hadron Calorimeter. We present the description of the system used to configure and readout the calorimeter during the campaign. The full set of final readout electronics boards was employed, together with the pre-series version of the data acquisition software. During the campaign, the hardware and software concepts for the final system were validated. The system allowed the inter-calibration of the ten Supermodules and allowed to perform several important studies of the detector performances, such as energy resolution, response linearity and radiation-hardness.

AB - The Electromagnetic Calorimeter of the CMS experiment at CERN is an homogeneous calorimeter made of about 80000 Lead Tungstate crystals, that will start to operate at the LHC at the end of 2007. From June to November 2006, ten barrel Supermodules (1700 crystals each) were exposed to beam at CERN SPS, both in standalone and in association with portions of the Hadron Calorimeter. We present the description of the system used to configure and readout the calorimeter during the campaign. The full set of final readout electronics boards was employed, together with the pre-series version of the data acquisition software. During the campaign, the hardware and software concepts for the final system were validated. The system allowed the inter-calibration of the ten Supermodules and allowed to perform several important studies of the detector performances, such as energy resolution, response linearity and radiation-hardness.

U2 - 10.1109/RTC.2007.4382836

DO - 10.1109/RTC.2007.4382836

M3 - Conference contribution

AN - SCOPUS:50249112571

SN - 1424408679

SN - 9781424408672

T3 - 2007 15th IEEE-NPSS Real-Time Conference, RT

BT - 2007 15th IEEE-NPSS Real-Time Conference, RT

T2 - 2007 15th IEEE-NPSS Real-Time Conference, RT

Y2 - 29 April 2007 through 4 May 2007

ER -

The CMS electromagnetic calorimeter data acquisition system at the 2006 test beam

Abstract

Publication series

Conference

Access to Document

Fingerprint

Cite this