Étude du rôle de la microstructure sur la résistance à la fissuration par fatigue des alliages TiAI à l'aide de la technique de corrélation d'images numériques de mouchetis

Fabienne Lagattu; Anne Lise Gloanec; Gilbert Hénaff; Jean Brillaud

doi:10.1051/meca:2005062

Étude du rôle de la microstructure sur la résistance à la fissuration par fatigue des alliages TiAI à l'aide de la technique de corrélation d'images numériques de mouchetis

Fabienne Lagattu
, Anne Lise Gloanec
, Gilbert Hénaff
, Jean Brillaud

CNRS

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

Résumé

This study deals with fatigue crack propagation in a TiAl alloy, manufactured by casting and powder metallurgy (PM). The cast alloy presents a lamellar microstructure, whereas the PM alloy exhibits an equiaxed γ microstructure. In order to get insight into crack propagation mechanisms in these two microstructures, full-field in-plane strains were measured near the crack tip during fatigue tests. An optical method based on digital image correlation has been used. The results show that the lamellar microstructure presents an enhanced capacity to accommodate overstrains at the crack tip, which explains its higher fatigue crack propagation resistance.

Titre traduit de la contribution	Influence of microstructure on fatieue crack growth resistance in TiAl alloys by using white light image correlation method
langue originale	Français
Pages (de - à)	499-507
Nombre de pages	9
journal	Mecanique et Industries
Volume	6
Numéro de publication	5
Les DOIs	https://doi.org/10.1051/meca:2005062
état	Publié - 1 sept. 2005

mots-clés

Correlation
Crack propagation
Fatigue
Strain
TiAl alloys

Accès au document

10.1051/meca:2005062

Empreinte digitale

Examiner les sujets de recherche de « Étude du rôle de la microstructure sur la résistance à la fissuration par fatigue des alliages TiAI à l'aide de la technique de corrélation d'images numériques de mouchetis ». Ensemble, ils forment une empreinte digitale unique.

Contient cette citation

@article{3b775695b0ba4f0a9b4d9bb6ef871bc6,

title = "{\'E}tude du r{\^o}le de la microstructure sur la r{\'e}sistance {\`a} la fissuration par fatigue des alliages TiAI {\`a} l'aide de la technique de corr{\'e}lation d'images num{\'e}riques de mouchetis",

abstract = "This study deals with fatigue crack propagation in a TiAl alloy, manufactured by casting and powder metallurgy (PM). The cast alloy presents a lamellar microstructure, whereas the PM alloy exhibits an equiaxed γ microstructure. In order to get insight into crack propagation mechanisms in these two microstructures, full-field in-plane strains were measured near the crack tip during fatigue tests. An optical method based on digital image correlation has been used. The results show that the lamellar microstructure presents an enhanced capacity to accommodate overstrains at the crack tip, which explains its higher fatigue crack propagation resistance.",

keywords = "Correlation, Crack propagation, Fatigue, Strain, TiAl alloys",

author = "Fabienne Lagattu and Gloanec, \{Anne Lise\} and Gilbert H{\'e}naff and Jean Brillaud",

year = "2005",

month = sep,

day = "1",

doi = "10.1051/meca:2005062",

language = "Fran{\c c}ais",

volume = "6",

pages = "499--507",

journal = "Mecanique et Industries",

issn = "1296-2139",

number = "5",

}

Étude du rôle de la microstructure sur la résistance à la fissuration par fatigue des alliages TiAI à l'aide de la technique de corrélation d'images numériques de mouchetis. / Lagattu, Fabienne; Gloanec, Anne Lise; Hénaff, Gilbert et al.
Dans: Mecanique et Industries, Vol 6, Numéro 5, 01.09.2005, p. 499-507.

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

TY - JOUR

T1 - Étude du rôle de la microstructure sur la résistance à la fissuration par fatigue des alliages TiAI à l'aide de la technique de corrélation d'images numériques de mouchetis

AU - Lagattu, Fabienne

AU - Gloanec, Anne Lise

AU - Hénaff, Gilbert

AU - Brillaud, Jean

PY - 2005/9/1

Y1 - 2005/9/1

N2 - This study deals with fatigue crack propagation in a TiAl alloy, manufactured by casting and powder metallurgy (PM). The cast alloy presents a lamellar microstructure, whereas the PM alloy exhibits an equiaxed γ microstructure. In order to get insight into crack propagation mechanisms in these two microstructures, full-field in-plane strains were measured near the crack tip during fatigue tests. An optical method based on digital image correlation has been used. The results show that the lamellar microstructure presents an enhanced capacity to accommodate overstrains at the crack tip, which explains its higher fatigue crack propagation resistance.

AB - This study deals with fatigue crack propagation in a TiAl alloy, manufactured by casting and powder metallurgy (PM). The cast alloy presents a lamellar microstructure, whereas the PM alloy exhibits an equiaxed γ microstructure. In order to get insight into crack propagation mechanisms in these two microstructures, full-field in-plane strains were measured near the crack tip during fatigue tests. An optical method based on digital image correlation has been used. The results show that the lamellar microstructure presents an enhanced capacity to accommodate overstrains at the crack tip, which explains its higher fatigue crack propagation resistance.

KW - Correlation

KW - Crack propagation

KW - Fatigue

KW - Strain

KW - TiAl alloys

U2 - 10.1051/meca:2005062

DO - 10.1051/meca:2005062

M3 - Article

AN - SCOPUS:27944503480

SN - 1296-2139

VL - 6

SP - 499

EP - 507

JO - Mecanique et Industries

JF - Mecanique et Industries

IS - 5

ER -