4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation

A. Cortés; Jose L. Aguilar; A. Cosola; Xoan Xosé Fernández Sanchez-Romate; A. Jiménez-Suárez; M. Sangermano; M. Campo; Silvia G. Prolongo

doi:10.1021/acsapm.1c00970

4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation

A. Cortés
, Jose L. Aguilar
, A. Cosola
, Xoan Xosé Fernández Sanchez-Romate
, A. Jiménez-Suárez
, M. Sangermano
, M. Campo
, Silvia G. Prolongo

Materials Science and Engineering Area
Universidad Rey Juan Carlos
Politecnico di Torino
Department of Applied Sciences and Technology

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

15 Citations (Scopus)

Résumé

The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 °C; Young's modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.

langue originale	Anglais
Pages (de - à)	5207-5215
Nombre de pages	9
journal	ACS Applied Polymer Materials
Volume	3
Numéro de publication	10
Les DOIs	https://doi.org/10.1021/acsapm.1c00970
état	Publié - 8 oct. 2021
Modification externe	Oui

Accès au document

10.1021/acsapm.1c00970

Contient cette citation

@article{9b1d67b98c4c4ad89a5a2b89ad4c86c1,

title = "4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation",

abstract = "The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 °C; Young's modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.",

keywords = "4D printing, additive manufacturing, carbon nanotubes, nanocomposites, shape memory",

author = "A. Cort{\'e}s and Aguilar, \{Jose L.\} and A. Cosola and \{Fern{\'a}ndez Sanchez-Romate\}, \{Xoan Xos{\'e}\} and A. Jim{\'e}nez-Su{\'a}rez and M. Sangermano and M. Campo and Prolongo, \{Silvia G.\}",

note = "Publisher Copyright: {\textcopyright} 2021 American Chemical Society.",

year = "2021",

month = oct,

day = "8",

doi = "10.1021/acsapm.1c00970",

language = "English",

volume = "3",

pages = "5207--5215",

journal = "ACS Applied Polymer Materials",

issn = "2637-6105",

publisher = "American Chemical Society",

number = "10",

}

TY - JOUR

T1 - 4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation

AU - Cortés, A.

AU - Aguilar, Jose L.

AU - Cosola, A.

AU - Fernández Sanchez-Romate, Xoan Xosé

AU - Jiménez-Suárez, A.

AU - Sangermano, M.

AU - Campo, M.

AU - Prolongo, Silvia G.

PY - 2021/10/8

Y1 - 2021/10/8

N2 - The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 °C; Young's modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.

AB - The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 °C; Young's modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.

KW - 4D printing

KW - additive manufacturing

KW - carbon nanotubes

KW - nanocomposites

KW - shape memory

U2 - 10.1021/acsapm.1c00970

DO - 10.1021/acsapm.1c00970

M3 - Article

AN - SCOPUS:85117272162

SN - 2637-6105

VL - 3

SP - 5207

EP - 5215

JO - ACS Applied Polymer Materials

JF - ACS Applied Polymer Materials

IS - 10

ER -

4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation

Résumé

Accès au document

Empreinte digitale

Contient cette citation