Design and measurement of high impedance surface

F. Linot; R. Cousin; X. Begaud; M. Soiron

Design and measurement of high impedance surface

F. Linot
, R. Cousin
, X. Begaud
, M. Soiron

CNRS LTCI
Thales Group
CST AG

Résultats de recherche: Le chapitre dans un livre, un rapport, une anthologie ou une collection › Contribution à une conférence › Revue par des pairs

13 Citations (Scopus)

Résumé

The design process of High Impedance Surface (HIS) is a challenge in realizing low-profile antenna. To carry out properly this process, a 3D-electromagnetic simulator is required. This paper shows an overview of the different numerical techniques which can be applied to simulate the behaviour of an HIS using CST Microwave Studio ® (CST MWS). The considered HIS is composed of a metallic square patches array printed on the top of a metal backed substrate. To demonstrate the validity of the different solvers used, some measurements of the dedicated structure have been performed in a waveguide simulator.

langue originale	Anglais
titre	EuCAP 2010 - The 4th European Conference on Antennas and Propagation
état	Publié - 12 août 2010
Modification externe	Oui
Evénement	4th European Conference on Antennas and Propagation, EuCAP 2010 - Barcelona, Espagne Durée: 12 avr. 2010 → 16 avr. 2010

Série de publications

Nom	EuCAP 2010 - The 4th European Conference on Antennas and Propagation

Une conférence

Une conférence	4th European Conference on Antennas and Propagation, EuCAP 2010
Pays/Territoire	Espagne
La ville	Barcelona
période	12/04/10 → 16/04/10

Contient cette citation

@inproceedings{931a9ac096c94acbb1d7edd24bca711e,

title = "Design and measurement of high impedance surface",

abstract = "The design process of High Impedance Surface (HIS) is a challenge in realizing low-profile antenna. To carry out properly this process, a 3D-electromagnetic simulator is required. This paper shows an overview of the different numerical techniques which can be applied to simulate the behaviour of an HIS using CST Microwave Studio {\textregistered} (CST MWS). The considered HIS is composed of a metallic square patches array printed on the top of a metal backed substrate. To demonstrate the validity of the different solvers used, some measurements of the dedicated structure have been performed in a waveguide simulator.",

author = "F. Linot and R. Cousin and X. Begaud and M. Soiron",

year = "2010",

month = aug,

day = "12",

language = "English",

isbn = "9788476534724",

series = "EuCAP 2010 - The 4th European Conference on Antennas and Propagation",

booktitle = "EuCAP 2010 - The 4th European Conference on Antennas and Propagation",

note = "4th European Conference on Antennas and Propagation, EuCAP 2010 ; Conference date: 12-04-2010 Through 16-04-2010",

}

Design and measurement of high impedance surface. / Linot, F.; Cousin, R.; Begaud, X. et al.
EuCAP 2010 - The 4th European Conference on Antennas and Propagation. 2010. 5505193 (EuCAP 2010 - The 4th European Conference on Antennas and Propagation).

Résultats de recherche: Le chapitre dans un livre, un rapport, une anthologie ou une collection › Contribution à une conférence › Revue par des pairs

TY - GEN

T1 - Design and measurement of high impedance surface

AU - Linot, F.

AU - Cousin, R.

AU - Begaud, X.

AU - Soiron, M.

PY - 2010/8/12

Y1 - 2010/8/12

N2 - The design process of High Impedance Surface (HIS) is a challenge in realizing low-profile antenna. To carry out properly this process, a 3D-electromagnetic simulator is required. This paper shows an overview of the different numerical techniques which can be applied to simulate the behaviour of an HIS using CST Microwave Studio ® (CST MWS). The considered HIS is composed of a metallic square patches array printed on the top of a metal backed substrate. To demonstrate the validity of the different solvers used, some measurements of the dedicated structure have been performed in a waveguide simulator.

AB - The design process of High Impedance Surface (HIS) is a challenge in realizing low-profile antenna. To carry out properly this process, a 3D-electromagnetic simulator is required. This paper shows an overview of the different numerical techniques which can be applied to simulate the behaviour of an HIS using CST Microwave Studio ® (CST MWS). The considered HIS is composed of a metallic square patches array printed on the top of a metal backed substrate. To demonstrate the validity of the different solvers used, some measurements of the dedicated structure have been performed in a waveguide simulator.

M3 - Conference contribution

AN - SCOPUS:77955315655

SN - 9788476534724

T3 - EuCAP 2010 - The 4th European Conference on Antennas and Propagation

BT - EuCAP 2010 - The 4th European Conference on Antennas and Propagation

T2 - 4th European Conference on Antennas and Propagation, EuCAP 2010

Y2 - 12 April 2010 through 16 April 2010

ER -

Design and measurement of high impedance surface

Résumé

Série de publications

Une conférence

Empreinte digitale

Contient cette citation