Development and characterisation of a screen-printed mixed potential gas sensor

A. Morata; J. P. Viricelle; A. Tarancón; G. Dezanneau; C. Pijolat; F. Peiro; J. R. Morante

doi:10.1016/j.snb.2007.09.086

Development and characterisation of a screen-printed mixed potential gas sensor

A. Morata
, J. P. Viricelle
, A. Tarancón
, G. Dezanneau
, C. Pijolat
, F. Peiro
, J. R. Morante

University of Barcelona
Ecole des Mines de Saint Etienne
SPMS, UMR 8580 CNRS-Ecole Centrale Paris, Grande Voie des Vignes

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

39 Citations (Scopus)

Résumé

We present a new mixed potential gas sensor configuration based on a stack structure fabricated by means of the screen-printing technique. The use of this method allows the implementation of a very compact planar device in an easy, fast and highly economical way. The proposed structure is tested using yttria-stabilized zirconia as electrolyte, and strontium-doped lanthanum manganite and gold as electrodes. Excellent performance and fast response time to CO polluting gas are corroborated at relatively low temperature. No cross-sensitivity to NO₂ is observed. Besides, the device signal remains remarkably stable in long-term experiments.

langue originale	Anglais
Pages (de - à)	561-566
Nombre de pages	6
journal	Sensors and Actuators, B: Chemical
Volume	130
Numéro de publication	1
Les DOIs	https://doi.org/10.1016/j.snb.2007.09.086
état	Publié - 14 mars 2008
Modification externe	Oui

Accès au document

10.1016/j.snb.2007.09.086

Contient cette citation

@article{2267e34289b8423c895c37773c9d7701,

title = "Development and characterisation of a screen-printed mixed potential gas sensor",

abstract = "We present a new mixed potential gas sensor configuration based on a stack structure fabricated by means of the screen-printing technique. The use of this method allows the implementation of a very compact planar device in an easy, fast and highly economical way. The proposed structure is tested using yttria-stabilized zirconia as electrolyte, and strontium-doped lanthanum manganite and gold as electrodes. Excellent performance and fast response time to CO polluting gas are corroborated at relatively low temperature. No cross-sensitivity to NO2 is observed. Besides, the device signal remains remarkably stable in long-term experiments.",

keywords = "Gas sensor, Mixed potential, Screen printing",

author = "A. Morata and Viricelle, \{J. P.\} and A. Taranc{\'o}n and G. Dezanneau and C. Pijolat and F. Peiro and Morante, \{J. R.\}",

year = "2008",

month = mar,

day = "14",

doi = "10.1016/j.snb.2007.09.086",

language = "English",

volume = "130",

pages = "561--566",

journal = "Sensors and Actuators, B: Chemical",

issn = "0925-4005",

publisher = "Elsevier B.V.",

number = "1",

}

TY - JOUR

T1 - Development and characterisation of a screen-printed mixed potential gas sensor

AU - Morata, A.

AU - Viricelle, J. P.

AU - Tarancón, A.

AU - Dezanneau, G.

AU - Pijolat, C.

AU - Peiro, F.

AU - Morante, J. R.

PY - 2008/3/14

Y1 - 2008/3/14

N2 - We present a new mixed potential gas sensor configuration based on a stack structure fabricated by means of the screen-printing technique. The use of this method allows the implementation of a very compact planar device in an easy, fast and highly economical way. The proposed structure is tested using yttria-stabilized zirconia as electrolyte, and strontium-doped lanthanum manganite and gold as electrodes. Excellent performance and fast response time to CO polluting gas are corroborated at relatively low temperature. No cross-sensitivity to NO2 is observed. Besides, the device signal remains remarkably stable in long-term experiments.

AB - We present a new mixed potential gas sensor configuration based on a stack structure fabricated by means of the screen-printing technique. The use of this method allows the implementation of a very compact planar device in an easy, fast and highly economical way. The proposed structure is tested using yttria-stabilized zirconia as electrolyte, and strontium-doped lanthanum manganite and gold as electrodes. Excellent performance and fast response time to CO polluting gas are corroborated at relatively low temperature. No cross-sensitivity to NO2 is observed. Besides, the device signal remains remarkably stable in long-term experiments.

KW - Gas sensor

KW - Mixed potential

KW - Screen printing

U2 - 10.1016/j.snb.2007.09.086

DO - 10.1016/j.snb.2007.09.086

M3 - Article

AN - SCOPUS:40849094761

SN - 0925-4005

VL - 130

SP - 561

EP - 566

JO - Sensors and Actuators, B: Chemical

JF - Sensors and Actuators, B: Chemical

IS - 1

ER -

Development and characterisation of a screen-printed mixed potential gas sensor

Résumé

Accès au document

Empreinte digitale

Contient cette citation