Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)-ZnMgO interface buffer layers

J. Serhan; Z. Djebbour; A. Darga; D. Mencaraglia; N. Naghavi; G. Renou; D. Lincot; J. F. Guillemeoles

doi:10.1016/j.solmat.2010.07.004

Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)-ZnMgO interface buffer layers

J. Serhan
, Z. Djebbour
, A. Darga
, D. Mencaraglia
, N. Naghavi
, G. Renou
, D. Lincot
, J. F. Guillemeoles

Université Paris-Sud 11
Department of Physics and Engineering Science
Université Versailles-Saint Quentin
Institut Photovoltaïque d'Ile-de-France

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

12 Citations (Scopus)

Résumé

We have studied ZnO:Al/ZnMgO/Zn(S,O,OH)/Cu(In,Ga)Se₂ solar cell (SC) metastability appearing during the measurement of its photovoltaic (PV) performances under AM 1.5 conditions, that is an increase with time of the PV parameters values before saturation, after about 20 min. These maximum values are not definitive since the SC returns to its initial state after about several hours. CV profiling performed before and after the SC illumination exhibits a light soaking assisted charge redistribution within the absorber. This redistribution has been improved by thermal annealing at 200 °C. This improvement is correlated with a decrease in defects density, measured with sub-gap photocurrent.

langue originale	Anglais
Pages (de - à)	1884-1888
Nombre de pages	5
journal	Solar Energy Materials and Solar Cells
Volume	94
Numéro de publication	11
Les DOIs	https://doi.org/10.1016/j.solmat.2010.07.004
état	Publié - 1 nov. 2010

SDG des Nations Unies

Ce résultat contribue à ou aux Objectifs de développement durable suivants

SDG 7 Énergie abordable et propre

Accès au document

10.1016/j.solmat.2010.07.004

Contient cette citation

@article{5e86e86f4f5b41d1b39783622dcd206f,

title = "Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)-ZnMgO interface buffer layers",

abstract = "We have studied ZnO:Al/ZnMgO/Zn(S,O,OH)/Cu(In,Ga)Se2 solar cell (SC) metastability appearing during the measurement of its photovoltaic (PV) performances under AM 1.5 conditions, that is an increase with time of the PV parameters values before saturation, after about 20 min. These maximum values are not definitive since the SC returns to its initial state after about several hours. CV profiling performed before and after the SC illumination exhibits a light soaking assisted charge redistribution within the absorber. This redistribution has been improved by thermal annealing at 200 °C. This improvement is correlated with a decrease in defects density, measured with sub-gap photocurrent.",

keywords = "CIGS, CV profiling, Metastability, SGP, ZnSZnMgO buffer",

author = "J. Serhan and Z. Djebbour and A. Darga and D. Mencaraglia and N. Naghavi and G. Renou and D. Lincot and Guillemeoles, \{J. F.\}",

year = "2010",

month = nov,

day = "1",

doi = "10.1016/j.solmat.2010.07.004",

language = "English",

volume = "94",

pages = "1884--1888",

journal = "Solar Energy Materials and Solar Cells",

issn = "0927-0248",

publisher = "Elsevier B.V.",

number = "11",

}

TY - JOUR

T1 - Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)-ZnMgO interface buffer layers

AU - Serhan, J.

AU - Djebbour, Z.

AU - Darga, A.

AU - Mencaraglia, D.

AU - Naghavi, N.

AU - Renou, G.

AU - Lincot, D.

AU - Guillemeoles, J. F.

PY - 2010/11/1

Y1 - 2010/11/1

N2 - We have studied ZnO:Al/ZnMgO/Zn(S,O,OH)/Cu(In,Ga)Se2 solar cell (SC) metastability appearing during the measurement of its photovoltaic (PV) performances under AM 1.5 conditions, that is an increase with time of the PV parameters values before saturation, after about 20 min. These maximum values are not definitive since the SC returns to its initial state after about several hours. CV profiling performed before and after the SC illumination exhibits a light soaking assisted charge redistribution within the absorber. This redistribution has been improved by thermal annealing at 200 °C. This improvement is correlated with a decrease in defects density, measured with sub-gap photocurrent.

AB - We have studied ZnO:Al/ZnMgO/Zn(S,O,OH)/Cu(In,Ga)Se2 solar cell (SC) metastability appearing during the measurement of its photovoltaic (PV) performances under AM 1.5 conditions, that is an increase with time of the PV parameters values before saturation, after about 20 min. These maximum values are not definitive since the SC returns to its initial state after about several hours. CV profiling performed before and after the SC illumination exhibits a light soaking assisted charge redistribution within the absorber. This redistribution has been improved by thermal annealing at 200 °C. This improvement is correlated with a decrease in defects density, measured with sub-gap photocurrent.

KW - CIGS

KW - CV profiling

KW - Metastability

KW - SGP

KW - ZnSZnMgO buffer

U2 - 10.1016/j.solmat.2010.07.004

DO - 10.1016/j.solmat.2010.07.004

M3 - Article

AN - SCOPUS:77957114283

SN - 0927-0248

VL - 94

SP - 1884

EP - 1888

JO - Solar Energy Materials and Solar Cells

JF - Solar Energy Materials and Solar Cells

IS - 11

ER -

Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)-ZnMgO interface buffer layers

Résumé

SDG des Nations Unies

Accès au document

Empreinte digitale

Contient cette citation