Improvement of polymorphous/crystalline heterojunction solar cells using low temperature screen-printed pastes

Y. Veschetti; J. C. Muller; J. Damon-Lacoste; P. Roca i Cabarrocas; A. S. Gudovskikh; J. P. Kleider; P. J. Ribeyron; E. Rolland

Improvement of polymorphous/crystalline heterojunction solar cells using low temperature screen-printed pastes

Y. Veschetti
, J. C. Muller
, J. Damon-Lacoste
, P. Roca i Cabarrocas
, A. S. Gudovskikh
, J. P. Kleider
, P. J. Ribeyron
, E. Rolland

Institut de Mécanique des Fluides
Institut polytechnique de Paris
Université Paris-Sud 11
Univ. Joseph Fourier-Grenoble 1

Résultats de recherche: Contribution à un journal › Article de conférence › Revue par des pairs

Résumé

An alternative way to conventional solar cell process is to develop a low temperature process using hydrogenated amorphous silicon (a-Si:H) thin film deposited by PECVD on bulk crystalline silicon. The French national project "SiNERGIES" aims to improve polymorphous/crystalline heterojunction (a-Si:H/pm-Si:H/c-Si) on p-type crystalline silicon (c-Si) to achieve large area solar cells for industrial application. We present the advancement of the project, focusing on low temperature screen-printed pastes (LT-SP) as well as the analysis of the pm-Si:H/c-Si interface quality. Up to now, solar cells of 25 cm² area using CZ (Si) substrate achieved efficiency close to 13.5% with a maximum fill factor of 70% with LTSP from Dupont MCM. A simulation study gives insight into the possible improvements.

langue originale	Anglais
Pages (de - à)	1131-1134
Nombre de pages	4
journal	Conference Record of the IEEE Photovoltaic Specialists Conference
état	Publié - 30 nov. 2005
Evénement	31st IEEE Photovoltaic Specialists Conference - 2005 - Lake Buena Vista, FL, États-Unis Durée: 3 janv. 2005 → 7 janv. 2005

Contient cette citation

@article{e3b1b0eb9b1248bea3ec28c86ffa3cfc,

title = "Improvement of polymorphous/crystalline heterojunction solar cells using low temperature screen-printed pastes",

abstract = "An alternative way to conventional solar cell process is to develop a low temperature process using hydrogenated amorphous silicon (a-Si:H) thin film deposited by PECVD on bulk crystalline silicon. The French national project {"}SiNERGIES{"} aims to improve polymorphous/crystalline heterojunction (a-Si:H/pm-Si:H/c-Si) on p-type crystalline silicon (c-Si) to achieve large area solar cells for industrial application. We present the advancement of the project, focusing on low temperature screen-printed pastes (LT-SP) as well as the analysis of the pm-Si:H/c-Si interface quality. Up to now, solar cells of 25 cm2 area using CZ (Si) substrate achieved efficiency close to 13.5\% with a maximum fill factor of 70\% with LTSP from Dupont MCM. A simulation study gives insight into the possible improvements.",

author = "Y. Veschetti and Muller, \{J. C.\} and J. Damon-Lacoste and \{Roca i Cabarrocas\}, P. and Gudovskikh, \{A. S.\} and Kleider, \{J. P.\} and Ribeyron, \{P. J.\} and E. Rolland",

year = "2005",

month = nov,

day = "30",

language = "English",

pages = "1131--1134",

journal = "Conference Record of the IEEE Photovoltaic Specialists Conference",

issn = "0160-8371",

note = "31st IEEE Photovoltaic Specialists Conference - 2005 ; Conference date: 03-01-2005 Through 07-01-2005",

}

TY - JOUR

T1 - Improvement of polymorphous/crystalline heterojunction solar cells using low temperature screen-printed pastes

AU - Veschetti, Y.

AU - Muller, J. C.

AU - Damon-Lacoste, J.

AU - Roca i Cabarrocas, P.

AU - Gudovskikh, A. S.

AU - Kleider, J. P.

AU - Ribeyron, P. J.

AU - Rolland, E.

PY - 2005/11/30

Y1 - 2005/11/30

N2 - An alternative way to conventional solar cell process is to develop a low temperature process using hydrogenated amorphous silicon (a-Si:H) thin film deposited by PECVD on bulk crystalline silicon. The French national project "SiNERGIES" aims to improve polymorphous/crystalline heterojunction (a-Si:H/pm-Si:H/c-Si) on p-type crystalline silicon (c-Si) to achieve large area solar cells for industrial application. We present the advancement of the project, focusing on low temperature screen-printed pastes (LT-SP) as well as the analysis of the pm-Si:H/c-Si interface quality. Up to now, solar cells of 25 cm2 area using CZ (Si) substrate achieved efficiency close to 13.5% with a maximum fill factor of 70% with LTSP from Dupont MCM. A simulation study gives insight into the possible improvements.

AB - An alternative way to conventional solar cell process is to develop a low temperature process using hydrogenated amorphous silicon (a-Si:H) thin film deposited by PECVD on bulk crystalline silicon. The French national project "SiNERGIES" aims to improve polymorphous/crystalline heterojunction (a-Si:H/pm-Si:H/c-Si) on p-type crystalline silicon (c-Si) to achieve large area solar cells for industrial application. We present the advancement of the project, focusing on low temperature screen-printed pastes (LT-SP) as well as the analysis of the pm-Si:H/c-Si interface quality. Up to now, solar cells of 25 cm2 area using CZ (Si) substrate achieved efficiency close to 13.5% with a maximum fill factor of 70% with LTSP from Dupont MCM. A simulation study gives insight into the possible improvements.

M3 - Conference article

AN - SCOPUS:27944506936

SN - 0160-8371

SP - 1131

EP - 1134

JO - Conference Record of the IEEE Photovoltaic Specialists Conference

JF - Conference Record of the IEEE Photovoltaic Specialists Conference

T2 - 31st IEEE Photovoltaic Specialists Conference - 2005

Y2 - 3 January 2005 through 7 January 2005

ER -

Improvement of polymorphous/crystalline heterojunction solar cells using low temperature screen-printed pastes

Résumé

Empreinte digitale

Contient cette citation