Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC

CMS Electromagnetic Calorimeter Group

doi:10.1088/1748-0221/21/01/P01001

Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC

CMS Electromagnetic Calorimeter Group

Centro Brasileiro de Pesquisas Fisicas
Institute of High Energy Physics, Chinese Academy of Sciences
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Split
Faculty of Science, University of Split
University of Cyprus
Université Paris-Saclay
Ip Paris
Institut de Physique des 2 Infinis de Lyon
Tata Institute of Fundamental Research, Mumbai
INFN Sezione di Milano-Bicocca
University of Milano-Bicocca
Istituto Nazionale di Fisica Nucleare, Sezione di Pisa
University of Pisa
Sezione di Roma
University of Rome
INFN Sezione di Torino
University of Turin
Laboratory of Molecular Pathology
INFN Sezione di Trieste
University of Trieste
Lisboa
University of Belgrade
University of Belgrade
European Organization for Nuclear Research
Paul Scherrer Institut
ETH Zurich
National Central University
National Taiwan University
University of Bristol
CCLRC Rutherford Appleton Laboratory
California Institute of Technology
Carnegie Mellon University
Florida State University
University of Kansas
University of Minnesota Twin Cities
Northeastern University
University of Notre Dame
University of Virginia

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

Résumé

The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam test campaigns conducted in 2018 and 2021 at the H4 and H2 beam lines of the CERN SPS are analyzed. Time and energy resolutions are measured on a 5× 5 matrix of lead tungstate crystals equipped with prototypes of the new front end readout electronics, using electron and pion beams of energies spanning from 25 to 250 GeV. In both campaigns the constant term of the energy resolution is measured to be better than 0.6% and the time resolution for electrons with energies above 50 GeV is measured to be better than 30 ps, fulfilling the design requirements.

langue originale	Anglais
Numéro d'article	P01001
journal	Journal of Instrumentation
Volume	21
Numéro de publication	1
Les DOIs	https://doi.org/10.1088/1748-0221/21/01/P01001
état	Publié - 1 janv. 2026

Accès au document

10.1088/1748-0221/21/01/P01001

Autres fichiers et liens

Lien vers la publication dans Scopus

Contient cette citation

@article{5b94ad79033a4243a472160c8d15612b,

title = "Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC",

abstract = "The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam test campaigns conducted in 2018 and 2021 at the H4 and H2 beam lines of the CERN SPS are analyzed. Time and energy resolutions are measured on a 5× 5 matrix of lead tungstate crystals equipped with prototypes of the new front end readout electronics, using electron and pion beams of energies spanning from 25 to 250 GeV. In both campaigns the constant term of the energy resolution is measured to be better than 0.6\% and the time resolution for electrons with energies above 50 GeV is measured to be better than 30 ps, fulfilling the design requirements.",

keywords = "Calorimeters, Front-end electronics for detector readout, Performance of High Energy Physics Detectors",

author = "\{CMS Electromagnetic Calorimeter Group\} and G. Alves and \{Rebello Teles\}, P. and \{Ferreira Siqueira Amaral Gomes\}, M. and T. Cao and M. Chen and S. Song and J. Tao and C. Wang and J. Wang and J. Zhang and N. Godinovic and D. Lelas and M. Kovac and A. Petkovic and Razis, \{P. A.\} and K. Aivazelis and F. Couderc and M. Dejardin and Faure, \{J. L.\} and F. Ferri and S. Ganjour and P. Gras and F. Guilloux and \{Hamel de Monchenault\}, G. and J. Malcles and F. Orlandi and S. Ronchi and P. Simkina and Z. Sun and M. Tornago and S. Vetter and G. Boldrini and Cuisset, \{T. D.\} and T. Debnath and Ehle, \{I. T.\} and L. Kalipoliti and M. Manoni and A. Zabi and A. Zghiche and P. Depasse and \{El Mamouni\}, H. and J. Fay and S. Gascon and B. Ille and M. Lethuillier and Chatterjee, \{R. M.\} and Sh Jain and G. Majumder and S. Parolia and R. Saxena",

note = "Publisher Copyright: {\textcopyright} 2026 CERN for the benefit of the CMS collaboration.",

year = "2026",

month = jan,

day = "1",

doi = "10.1088/1748-0221/21/01/P01001",

language = "English",

volume = "21",

journal = "Journal of Instrumentation",

issn = "1748-0221",

publisher = "Institute of Physics",

number = "1",

}

TY - JOUR

T1 - Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC

AU - CMS Electromagnetic Calorimeter Group

AU - Alves, G.

AU - Rebello Teles, P.

AU - Ferreira Siqueira Amaral Gomes, M.

AU - Cao, T.

AU - Chen, M.

AU - Song, S.

AU - Tao, J.

AU - Wang, C.

AU - Wang, J.

AU - Zhang, J.

AU - Godinovic, N.

AU - Lelas, D.

AU - Kovac, M.

AU - Petkovic, A.

AU - Razis, P. A.

AU - Aivazelis, K.

AU - Couderc, F.

AU - Dejardin, M.

AU - Faure, J. L.

AU - Ferri, F.

AU - Ganjour, S.

AU - Gras, P.

AU - Guilloux, F.

AU - Hamel de Monchenault, G.

AU - Malcles, J.

AU - Orlandi, F.

AU - Ronchi, S.

AU - Simkina, P.

AU - Sun, Z.

AU - Tornago, M.

AU - Vetter, S.

AU - Boldrini, G.

AU - Cuisset, T. D.

AU - Debnath, T.

AU - Ehle, I. T.

AU - Kalipoliti, L.

AU - Manoni, M.

AU - Zabi, A.

AU - Zghiche, A.

AU - Depasse, P.

AU - El Mamouni, H.

AU - Fay, J.

AU - Gascon, S.

AU - Ille, B.

AU - Lethuillier, M.

AU - Chatterjee, R. M.

AU - Jain, Sh

AU - Majumder, G.

AU - Parolia, S.

AU - Saxena, R.

PY - 2026/1/1

Y1 - 2026/1/1

N2 - The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam test campaigns conducted in 2018 and 2021 at the H4 and H2 beam lines of the CERN SPS are analyzed. Time and energy resolutions are measured on a 5× 5 matrix of lead tungstate crystals equipped with prototypes of the new front end readout electronics, using electron and pion beams of energies spanning from 25 to 250 GeV. In both campaigns the constant term of the energy resolution is measured to be better than 0.6% and the time resolution for electrons with energies above 50 GeV is measured to be better than 30 ps, fulfilling the design requirements.

AB - The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam test campaigns conducted in 2018 and 2021 at the H4 and H2 beam lines of the CERN SPS are analyzed. Time and energy resolutions are measured on a 5× 5 matrix of lead tungstate crystals equipped with prototypes of the new front end readout electronics, using electron and pion beams of energies spanning from 25 to 250 GeV. In both campaigns the constant term of the energy resolution is measured to be better than 0.6% and the time resolution for electrons with energies above 50 GeV is measured to be better than 30 ps, fulfilling the design requirements.

KW - Calorimeters

KW - Front-end electronics for detector readout

KW - Performance of High Energy Physics Detectors

UR - https://www.scopus.com/pages/publications/105034108300

U2 - 10.1088/1748-0221/21/01/P01001

DO - 10.1088/1748-0221/21/01/P01001

M3 - Article

AN - SCOPUS:105034108300

SN - 1748-0221

VL - 21

JO - Journal of Instrumentation

JF - Journal of Instrumentation

IS - 1

M1 - P01001

ER -

Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC

Résumé

Accès au document

Autres fichiers et liens

Empreinte digitale

Contient cette citation