Synthesis of tungsten nanopowders: Comparison of milling, SHS, MASHS and milling-induced chemical processes

Sarah Dine; Sara Aïd; Karim Ouaras; Véronique Malard; Michaël Odorico; Nathalie Herlin-Boime; Aurélie Habert; Adèle Gerbil-Margueron; Christian Grisolia; Jacques Chêne; Gregory Pieters; Bernard Rousseau; Dominique Vrel

doi:10.1016/j.apt.2015.07.004

Synthesis of tungsten nanopowders: Comparison of milling, SHS, MASHS and milling-induced chemical processes

Sarah Dine
, Sara Aïd
, Karim Ouaras
, Véronique Malard
, Michaël Odorico
, Nathalie Herlin-Boime
, Aurélie Habert
, Adèle Gerbil-Margueron
, Christian Grisolia
, Jacques Chêne
, Gregory Pieters
, Bernard Rousseau
, Dominique Vrel

Université Paris 13
CEA/UVSQ/CNRS
CEA Cadarache
Building 547

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

Résumé

Synthesis of tungsten nanopowders was studied using milling of micrometric tungsten, then using the WO₃-Mg thermitic reaction, using SHS (Self-propagating High-temperature Synthesis), milling induced chemical reaction (MICR), and MASHS (Mechanically Activated SHS). Reactions are studied by measuring temperature and pressure inside the milling jar (during MICR), or by analyzing the temperature profile along the sample during the reaction propagation by infrared thermography (SHS, MASHS). After reaction, samples were analyzed by AFM or SEM, by XRD, and BET. MASHS seems to possess optimum conditions with a pre-milling before SHS of 10 min, which yielded the highest tungsten purity, together with a grain size corresponding to our aim.

langue originale	Anglais
Pages (de - à)	1300-1305
Nombre de pages	6
journal	Advanced Powder Technology
Volume	26
Numéro de publication	5
Les DOIs	https://doi.org/10.1016/j.apt.2015.07.004
état	Publié - 1 sept. 2015
Modification externe	Oui

Accès au document

10.1016/j.apt.2015.07.004

Contient cette citation

Dine, S., Aïd, S., Ouaras, K., Malard, V., Odorico, M., Herlin-Boime, N., Habert, A., Gerbil-Margueron, A., Grisolia, C., Chêne, J., Pieters, G., Rousseau, B., & Vrel, D. (2015). Synthesis of tungsten nanopowders: Comparison of milling, SHS, MASHS and milling-induced chemical processes. Advanced Powder Technology, 26(5), 1300-1305. https://doi.org/10.1016/j.apt.2015.07.004

@article{3f6b767c110842c894dfa259267249df,

title = "Synthesis of tungsten nanopowders: Comparison of milling, SHS, MASHS and milling-induced chemical processes",

abstract = "Synthesis of tungsten nanopowders was studied using milling of micrometric tungsten, then using the WO3-Mg thermitic reaction, using SHS (Self-propagating High-temperature Synthesis), milling induced chemical reaction (MICR), and MASHS (Mechanically Activated SHS). Reactions are studied by measuring temperature and pressure inside the milling jar (during MICR), or by analyzing the temperature profile along the sample during the reaction propagation by infrared thermography (SHS, MASHS). After reaction, samples were analyzed by AFM or SEM, by XRD, and BET. MASHS seems to possess optimum conditions with a pre-milling before SHS of 10 min, which yielded the highest tungsten purity, together with a grain size corresponding to our aim.",

keywords = "Mechanical activation, Milling-induced chemical reaction, Nanopowders, Self-propagating High-temperature Synthesis, Tungsten",

author = "Sarah Dine and Sara A{\"i}d and Karim Ouaras and V{\'e}ronique Malard and Micha{\"e}l Odorico and Nathalie Herlin-Boime and Aur{\'e}lie Habert and Ad{\`e}le Gerbil-Margueron and Christian Grisolia and Jacques Ch{\^e}ne and Gregory Pieters and Bernard Rousseau and Dominique Vrel",

year = "2015",

month = sep,

day = "1",

doi = "10.1016/j.apt.2015.07.004",

language = "English",

volume = "26",

pages = "1300--1305",

journal = "Advanced Powder Technology",

issn = "0921-8831",

number = "5",

}

Dine, S, Aïd, S, Ouaras, K, Malard, V, Odorico, M, Herlin-Boime, N, Habert, A, Gerbil-Margueron, A, Grisolia, C, Chêne, J, Pieters, G, Rousseau, B & Vrel, D 2015, 'Synthesis of tungsten nanopowders: Comparison of milling, SHS, MASHS and milling-induced chemical processes', Advanced Powder Technology, VOL. 26, Numéro 5, p. 1300-1305. https://doi.org/10.1016/j.apt.2015.07.004

TY - JOUR

T1 - Synthesis of tungsten nanopowders

T2 - Comparison of milling, SHS, MASHS and milling-induced chemical processes

AU - Dine, Sarah

AU - Aïd, Sara

AU - Ouaras, Karim

AU - Malard, Véronique

AU - Odorico, Michaël

AU - Herlin-Boime, Nathalie

AU - Habert, Aurélie

AU - Gerbil-Margueron, Adèle

AU - Grisolia, Christian

AU - Chêne, Jacques

AU - Pieters, Gregory

AU - Rousseau, Bernard

AU - Vrel, Dominique

PY - 2015/9/1

Y1 - 2015/9/1

N2 - Synthesis of tungsten nanopowders was studied using milling of micrometric tungsten, then using the WO3-Mg thermitic reaction, using SHS (Self-propagating High-temperature Synthesis), milling induced chemical reaction (MICR), and MASHS (Mechanically Activated SHS). Reactions are studied by measuring temperature and pressure inside the milling jar (during MICR), or by analyzing the temperature profile along the sample during the reaction propagation by infrared thermography (SHS, MASHS). After reaction, samples were analyzed by AFM or SEM, by XRD, and BET. MASHS seems to possess optimum conditions with a pre-milling before SHS of 10 min, which yielded the highest tungsten purity, together with a grain size corresponding to our aim.

AB - Synthesis of tungsten nanopowders was studied using milling of micrometric tungsten, then using the WO3-Mg thermitic reaction, using SHS (Self-propagating High-temperature Synthesis), milling induced chemical reaction (MICR), and MASHS (Mechanically Activated SHS). Reactions are studied by measuring temperature and pressure inside the milling jar (during MICR), or by analyzing the temperature profile along the sample during the reaction propagation by infrared thermography (SHS, MASHS). After reaction, samples were analyzed by AFM or SEM, by XRD, and BET. MASHS seems to possess optimum conditions with a pre-milling before SHS of 10 min, which yielded the highest tungsten purity, together with a grain size corresponding to our aim.

KW - Mechanical activation

KW - Milling-induced chemical reaction

KW - Nanopowders

KW - Self-propagating High-temperature Synthesis

KW - Tungsten

U2 - 10.1016/j.apt.2015.07.004

DO - 10.1016/j.apt.2015.07.004

M3 - Article

AN - SCOPUS:84942575731

SN - 0921-8831

VL - 26

SP - 1300

EP - 1305

JO - Advanced Powder Technology

JF - Advanced Powder Technology

IS - 5

ER -

Synthesis of tungsten nanopowders: Comparison of milling, SHS, MASHS and milling-induced chemical processes

Résumé

Accès au document

Empreinte digitale

Contient cette citation