Wind infrared Doppler lidar instrument

Ch Werner; P. H. Flamant; O. Reitebuch; F. Köpp; J. Streicher; S. Rahm; E. Nagel; M. Klier; H. Herrmann; C. Loth; P. Delville; P. Drobinski; B. Romand; Ch Boitel; D. Oh; M. Lopez; M. Meissonnier; D. Bruneau; A. Dabas

doi:10.1117/1.1335530

Wind infrared Doppler lidar instrument

Ch Werner
, P. H. Flamant
, O. Reitebuch
, F. Köpp
, J. Streicher
, S. Rahm
, E. Nagel
, M. Klier
, H. Herrmann
, C. Loth
, P. Delville
, P. Drobinski
, B. Romand
, Ch Boitel
, D. Oh
, M. Lopez
, M. Meissonnier
, D. Bruneau
, A. Dabas

École Polytechnique

DLR
Division Technique
Sorbonne Université
Météo-France/CNRS

Résultats de recherche: Contribution à un journal › Article › Revue par des pairs

Résumé

The purpose of the project WIND (wind infrared Doppler lidar) is the development of an airborne conical scanning CO₂ Doppler lidar in French-German cooperation by CNRS/CNES and DLR. The instrument and its peculiarities are described. Measurements of the Doppler shift from a moving platform with an accuracy of 1 m/s require instantaneous access to the position data of the platform. Therefore this part of the instrument is described in detail. Ground-based tests, airborne tests and a validation flight were performed. The instrument can be used for mesoscalic meteorology to test models and contribute to a spaceborne Doppler lidar in the future.

langue originale	Anglais
Pages (de - à)	115-125
Nombre de pages	11
journal	Optical Engineering
Volume	40
Numéro de publication	1
Les DOIs	https://doi.org/10.1117/1.1335530
état	Publié - 1 janv. 2001

Accès au document

10.1117/1.1335530

Autres fichiers et liens

Lien vers la publication dans Scopus

Contient cette citation

@article{c46f3db51ab042f799a5c02fc88ff752,

title = "Wind infrared Doppler lidar instrument",

abstract = "The purpose of the project WIND (wind infrared Doppler lidar) is the development of an airborne conical scanning CO2 Doppler lidar in French-German cooperation by CNRS/CNES and DLR. The instrument and its peculiarities are described. Measurements of the Doppler shift from a moving platform with an accuracy of 1 m/s require instantaneous access to the position data of the platform. Therefore this part of the instrument is described in detail. Ground-based tests, airborne tests and a validation flight were performed. The instrument can be used for mesoscalic meteorology to test models and contribute to a spaceborne Doppler lidar in the future.",

keywords = "Airborne operation, Doppler lidar, Heterodyne detection, Lidar, Wind remote sensing",

author = "Ch Werner and Flamant, \{P. H.\} and O. Reitebuch and F. K{\"o}pp and J. Streicher and S. Rahm and E. Nagel and M. Klier and H. Herrmann and C. Loth and P. Delville and P. Drobinski and B. Romand and Ch Boitel and D. Oh and M. Lopez and M. Meissonnier and D. Bruneau and A. Dabas",

note = "Funding Information: Development of this project was supported by DLR (Deut-sches Zentrum f{\"u}r Luft-und Raumfahrt), CNES (Center National d{\textquoteright}Etudes Spatiales) and INSU/CNRS (Center National Recherche Scientifique). The authors would like to",

year = "2001",

month = jan,

day = "1",

doi = "10.1117/1.1335530",

language = "English",

volume = "40",

pages = "115--125",

journal = "Optical Engineering",

issn = "0091-3286",

number = "1",

}

TY - JOUR

T1 - Wind infrared Doppler lidar instrument

AU - Werner, Ch

AU - Flamant, P. H.

AU - Reitebuch, O.

AU - Köpp, F.

AU - Streicher, J.

AU - Rahm, S.

AU - Nagel, E.

AU - Klier, M.

AU - Herrmann, H.

AU - Loth, C.

AU - Delville, P.

AU - Drobinski, P.

AU - Romand, B.

AU - Boitel, Ch

AU - Oh, D.

AU - Lopez, M.

AU - Meissonnier, M.

AU - Bruneau, D.

AU - Dabas, A.

N1 - Funding Information: Development of this project was supported by DLR (Deut-sches Zentrum für Luft-und Raumfahrt), CNES (Center National d’Etudes Spatiales) and INSU/CNRS (Center National Recherche Scientifique). The authors would like to

PY - 2001/1/1

Y1 - 2001/1/1

N2 - The purpose of the project WIND (wind infrared Doppler lidar) is the development of an airborne conical scanning CO2 Doppler lidar in French-German cooperation by CNRS/CNES and DLR. The instrument and its peculiarities are described. Measurements of the Doppler shift from a moving platform with an accuracy of 1 m/s require instantaneous access to the position data of the platform. Therefore this part of the instrument is described in detail. Ground-based tests, airborne tests and a validation flight were performed. The instrument can be used for mesoscalic meteorology to test models and contribute to a spaceborne Doppler lidar in the future.

AB - The purpose of the project WIND (wind infrared Doppler lidar) is the development of an airborne conical scanning CO2 Doppler lidar in French-German cooperation by CNRS/CNES and DLR. The instrument and its peculiarities are described. Measurements of the Doppler shift from a moving platform with an accuracy of 1 m/s require instantaneous access to the position data of the platform. Therefore this part of the instrument is described in detail. Ground-based tests, airborne tests and a validation flight were performed. The instrument can be used for mesoscalic meteorology to test models and contribute to a spaceborne Doppler lidar in the future.

KW - Airborne operation

KW - Doppler lidar

KW - Heterodyne detection

KW - Lidar

KW - Wind remote sensing

UR - https://www.scopus.com/pages/publications/0035056591

U2 - 10.1117/1.1335530

DO - 10.1117/1.1335530

M3 - Article

AN - SCOPUS:0035056591

SN - 0091-3286

VL - 40

SP - 115

EP - 125

JO - Optical Engineering

JF - Optical Engineering

IS - 1

ER -

Wind infrared Doppler lidar instrument

Résumé

Accès au document

Autres fichiers et liens

Empreinte digitale

Contient cette citation